PVDF

This product should be processed under 370centigrade,to avoid producing toxic gases...... PVDF SF1102 Extrusion Grade—Pellet Characteristic 

Physical properties	Unit	Specification	ASTM Test standard
Appearance	--	White and semi-transparent pellets	--
Density	g/cm3	1.75~1.77	ASTM D792, @23/23°C
MFR	g/10min	5~15	ASTM D1238, 230°C/5kg
Rotation Viscosity	--	--	--
Intrinsic Viscosity	--	--	--
Water absorption	%	≤0.05	ASTM D570
Mechanical properties
Tensile yield strength	Mpa	≥40	ASTM D638 50mm/min@23°C
Yield elongation	%	5-10
Tensile strength	Mpa	≥40
Elongation at break	%	50~250
Hardness	Shore D	70-80
Thermal properties
Melting point	°C	160-174	ASTM D3418,10°C/min
Crystallizing heat	°C	140	--
Brittleness temperature	°C	0-10	ASTM D746A
Molding shrinkage	%	2-3
Electrical properties
Surface resistivity	Ohm/square	≥1.1014	ASTM D257/Din 53483
Volume resistivity	Ohm.cm	≥1.1014	ASTM D257/Din 53483

Process safety instructions1.This product should be processed under 370°C,to avoid producing toxic gases;2. PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;3.Operators should take good care of personal protection during the use procedure and processing. Packaging and storage4.25 kg and 250 kg packages can be provided. PVDF is packed in double layer of polyethylene plastic bag and then put into a hard cardboard drum.5.It must be stored in clean, cool, dry place.

PVDF